Monday, October 27, 2008

Long Don Silva Stream

Other techniques to undermine the Pike: Drakovitch and DROPSHOT

A very effective technique to ferret out even the most suspicious and wary pike is that of dead or Mort Manie m anovrato. The equipment needed for this type of fishing is different from that for spinning rods that are used, In fact, these are very long with a handle that stays in contact with the whole arm, making contact and optimal control of the bait. As bait using small carp, small chub and small perch that are "inbragati" with a particular frame that takes its name from its inventor who is Drakovitch (see picture on left). This consists of a sort of hairpin steel to which are attached two arms equipped with stir bar and a piece of copper wire of 15 cm with a diameter of between 0.30 and 0.50 mm (hence I was inspired by the 'pop-up trigger I'm talking about in terminals in carp ;-) It can then be combined with a sinker, Chevrotine, black or red for action sinking bait. It is not always so, in fact sometimes Chevrotine is not incorporated in the frame and is connected to the frame on a hook that will then connect everything to the main line. This fishing technique is not difficult nor expensive, as you have seen enough a few simple things, also in many cases is much more effective nell'insidiare predators in our waters over the spinning. That said and pointed out that to give a good mobility, the frame must be the bait along the middle of this, we now see in detail how our trigger fish bait:


The step-insert the range of the fish through the mouth-

II step-take the copper wire and pass through the fish a few millimeters behind the gills and then go and to ensure the frame without cutting the flesh of the bait-

III step-by-position the anchors in a belly, tied to the shorter arm, and a tail, tied to the longer-


Here is a picture of how the recovery must be performed, which is of the same type as the one for use with silicone *:









* Drakovitch the frame for the initiation of silicone is shaped like a fork, but a corkscrew and has no copper wire. In trade, I know, is not, but you can make enough hand to obtain: stainless steel wire (available at any hardware store), proportionate to the size of the bait keepers of soft steel wire that appropriate to build terminals for pike and a little 'imagination and intuition ... good job! (If you enjoyed Build well even some classical frame ... ;-) I also suggest you save this topic for watching the movie with emule download [DivX - ITA Fishing] DVD Fishing 0 - Predators - pike fishing )

Baby Antique English Prams Ebay

Spinning for pike


The pike is one of the most sought after prey by spinning anglers of most of them with the arrival of the first chill of autumn (it In fact, by this time that the pike come into greater activity than the summer) place the equipment by the "summer" for hunting bass, the other of the two preys, and prepare that much more powerful and robust to challenge our . The equipment is a must to be strong for two main reasons: first because, although the average size of pike that are caught in our inland waters is about 1 kg, we remember that some samples may exceed 10 kg (rare, but ... Let's say we lose it?)! and second, because when pike fishing around the corner there is always the possibility of hitting some big catfish, so it's always good to be adequately prepared. Having said this let us examine the most important lures for this type of fishing:


ESSENTIAL

* Rotating single or tandem (ie two scoops) from 20 g up or a size equivalent

Martin original 20 grams, Mepps No. 7


Two or three minnows shallow runner no smaller than 8 cm
Two rapala
Above: X-Rap 10 cm
Below: Minnow Rap 10 cm

few big fish silicone * (there are very good predictors of the fox head with lead, as in the picture below)

Fox Shad Pike
70 oz, silicone primer with Drachkovitch



RECOMMENDED

Some Jerkbaits: These are very special man, have very large (even if there is a subfamily of small ... maybe it's better to start off with these, if the size of their "brothers" bigger does not convince you too, but after the first results I assure you that will change your mind ;-) and unlike minnow do not have a car imitative movement, then you will be in having to animate. There are various types with different shapes, sinking rate and method of recovery (in the picture below for example, must be recovered, giving the small taps with the tip of the barrel). If you are interested in the topic and want to advise you to download this video on Emule: [DivX - ITA Fishing] DVD Fishing 0 - Predators - pike fishing.


Big spinnerbaits


OPTIONAL

Rane fake or facsimiles

Imitation mice

Etc. ..


Let us study the action of fishing, but first I want some advice on the choice of spots: in general, good results are obtained near obstacles sommersivicino and then as the bass prefer to go with their man close to the pylons of bridges, reeds, grass-submerged trunks and fallen into the water near any kind of artificial and natural barriers. The recovery of the rotating and minnows must be a slow recovery measured by short pauses and slight changes in speed (not like the pike chasing its prey like the black bass, but wait, hidden in his hut among twigs and algae, that this the next steps to attack by surprise). For the recovery of jerkbaits just read the specific instructions on the package, at least for those of the fox ... and for the recovery of silicon you have to, as in pitching, let the bait fall to the bottom and then give it two or three tugs to the 'catching up a bit and then' letting it fall to the bottom line immediately after repeating again the sequence to the shore or in the boat.







* The colors to choose from: white, red, orange and yellow

Tuesday, October 21, 2008

Sample Letters For Community Service Hours

Other artificial fishing baits to bass

As I promised you first speak of jigs, excellent bass bait algae to undermine the barriers between natural and non- , but also not to ignore is that you can use to probe the depths (in winter) when the fish are not active and go to burrow deeper. They come in various weights, to be chosen depending on the speed of descent that you want to have during the fishing action, and depending on water depths you want to explore, in many combinations of different colors.


Other artificial interesting to undermine our own, but belonging to the family of minnows, are these:


these you see are all the more famous company in the world that creates this kind of bait, namely, the Rapala-Normark Group founded around 1936 by Lauri Rapala, a Finnish lumberjack. His minnows are, in my opinion the best on the market for two reasons. Firstly they are made with the finest materials (balsa and plastic) and finished with impressive details, and then their movement in water is very realistic and priming (when the fishing action may get you in a linear fashion without too many tricks such as shots, change speed and direction, pauses and tear in, and you still would get good results). In order from top to bottom there are a Husky Jerk, a Skitter Prop, a Dives to Flat, a Rattlin 'Rapala Shallow Runner and Jointed.
The first is a suspending, this means that if you stop him is to recover the depth at which it stopped. His fishing action does not exceed 2 m in depth.
The second is a minnow to the surface, which then belongs to the family of topwater, with a propeller at the rear This allows him, once in motion, to produce a lot of vibration and noise to attract the bass are infallible when they are hunting (it's deadly!).
The third is an artificial depth (crankbait), in fact, during the fishing action can be up to 4 m. Artificial useful to cause the bass to rest on the seabed.
the Rattlin 'is an artificial very versatile that one can work at virtually any depth by simply changing the speed of recovery (recovered slowly recovered quickly while working in depth works almost sleeping area) and through the beads to the metal strips Inside produces strong vibrations, which name. This formula is specific to the bass fishing and then say that it is essential if you want to "specialize" in this branch of spinning.
And finally the last is a minnow that can be defined because it is a complete and suspending a jointed (is divided into two). For this is effective for every predator in the smaller models. For the bass is the best model 5 cm, though not essential, as is not, however, where the trout fishing is one of the best minnows as to the effectiveness and versatility.
There is a problem ... the minnows the Rapala cost a lot of money ... and if you lose, believe me there to eat my hands ... but if you're interested I know a wholesaler Italian that manages to have me know about them at half price! We will reach the perfect at home.


RECOVERY OF ARTIFICIAL (minnows and spoons in general)

When the bass is in perfect hunting * recovery is rapid cadence of short breaks (usually occurs when the attack ). In other situations, namely when the fish show apathetic, listless, and so on., It should animate our baits with sudden changes of speed and direction, alternated with brief pauses preceded and followed by some little jerk, this will simulate the behavior of a fish injured or in difficulty making it more interesting and inviting our artificial intelligence that will be more easily attacked.




* how many times I talked about bass on the hunt ... but how do we understand it begins with references to time to find the best points? Well it's easy to look at the water's surface. If you see fish jumping and many trails then surely there are some bass in the hunt. Better yet, if equipped with polarized sunglasses (do not cost much, if they are from 20 € ...) then you will be able to see them just below the surface.

Monday, October 20, 2008

Diesel Leak Astra Fuel Pump

silicone primers, frames and

bait silicon there are really many types, but can be divided and grouped into four distinct groups according to their shape: Vermon, grubs, fish and creatures. I will focus especially on my Vermona which are the bait most commonly used silicone, but first will be faster than in the other rassega. The grubs already know them (see the article about "Spinning at the Black Bass"), that small and medium sized bearing baited hooks to the head of lead are used for fishing for trout and baby bass, while the bigger ones are used to fish for black bass and pike perch. The fish of silicone products in every color and size imaginable, from the smallest 3 cm long that can also be found together with little teaspoons (artificial deadly for trout) to the bigger ones over 20 cm used for fishing for pike when you go to look at the bottom. The creatures were invented specifically instead undermine the bass, if they are really weird shapes more strange, almost alien ;-)... the most common are those shaped ones that look like shrimp and Vermon but have a number of appendices. These baits are very effective, especially when the fish show "listless" and apathetic, as with numerous appendages produce much more vibration than the grubs and the Vermon and therefore are more priming. However, the methods of initiation and use are basically the same as the fishery and then to black vediamoli considering, as aforesaid, the Vermona:

TRIGGER

For use hooks: hooks are specific for the initiation of this type of bait available in various sizes obviously to adapt to different sizes of silicon (in ° 2 Vermona are good for between 10 and 15 cm). There is also a variant of algae, but since the triggers with normal love already makes all algae, I think they are useless in these circumstances. Watch the video below to see how un'innesco correct ... it is very fast and simple ...:



(WARNING: Do not leave the tip of the bait, but bring it closer to the surface only!)

FRAMES

I use it mainly three: the free, ie without plumbing that is used for fishing on the surface with a fast recovery interspersed with short breaks (keep the tip of the rod high), that a rapid descent, for the realization of which are used in bullet weights and the slow-down characterized by a gradual climb plumbing that starting from a foot above the hook moves closer to it. The fishing action with the last two frames is as follows: run the bait and let it fall to the bottom where you have to leave for 10 seconds before you start to recover by giving the small, but firm tug on the bottom and then let it go (usually this is the moment when the black bass attacks). Continue this until the shore or boat (it happens sometimes that the attack takes place at the last moment, even though the bass is a fish known to be shy). This is the technique of pitching that can be used with other baits such esmpio the Jigs (artificial that I will talk in next article).

frames in rapid descent

First to initiate the wire Vermona the hook to a piece of nylon 40 cm so that there remains a surplus of at least 4 cm, now included in the lead bullet and lock it around the hook by tying the surplus to the line just above that (just a normal triple-node). * Finally do a loop at the end of the remaining nylon. To tie the hook:


frame to slow down


The arrangement of the sinkers is that you see in the picture above: starting from 30 cm above the hook with a sinker down and then 1.80 g of 1 cm with two lead weights of 0.70 g, placed each other at a distance of 3 mm, from here down to 16 cm where to put two sinkers from 0.40 grams 2 mm apart, then two lead after 7 cm distant from 0.30 g cm 1 2.5 mm after two lead from 0.20 g neighbors and finally two lead after 0.5 cm of 0.10 g always attacked. To get a slow down even more to maintain the same order for the weights instead of reversing the clearances, ie reducing the length of the intervals between the seals away from the beloved.


* node slots